Sampling Probes & CEMS Components
NH3 Converter
Model Z-106P Ein
Z-106P Ein internally heated NH₃-to-NOx converter in a 19" rack enclosure, enabling accurate ammonia slip measurement with CEMS and gas analyzers.
- Designed & manufactured in-house
- Tested & calibrated to traceable national standards
- Installation, AMC & after-sales support
Talk to our technical team: 08048057962
Overview
The Z-106P Ein NH₃ Converter converts ammonia (NH₃) in the sample gas into NO / NOx so that ammonia can be measured accurately by a NOx analyzer. It is used mainly for NH₃ slip monitoring downstream of SCR / SNCR de-NOx systems, together with CEMS and gas analyzers.
The converter is internally heated, and an integrated digital temperature controller with front-panel display holds the conversion temperature. It is housed in a powder-coated 19" rack-mount enclosure with over-temperature protection and air cooling; gas connections are in stainless steel or PTFE to suit the application.
Key features
- NH₃ to NOx conversion for ammonia measurement
- Internally heated with digital temperature controller
- Front-panel temperature display
- Over-temperature protection
- 19" rack-mount, powder-coated enclosure
- SS or PTFE gas connections
- Compatible with NH₃, NO, NO₂, SO₂, CO, CO₂, O₂ sample gas
Applications
- NH₃ slip measurement in flue gas
- Emission monitoring systems (CEMS)
- Air quality monitoring
Technical specifications
| Model | Z-106P Ein |
|---|---|
| Converter Type | NH₃ to NOx Converter |
| Application | NH₃ slip measurement in flue gas |
| Conversion Efficiency | ≥ 95–98% (typical) |
| Operating Temperature | Up to 350–400 °C (internally heated) |
| Heater Control | Integrated digital temperature controller |
| Display | Front-panel digital temperature display |
| Warm-up Time | Approx. 30–45 minutes |
| Compatible Gases | NH₃, NO, NO₂, SO₂, CO, CO₂, O₂ |
|---|---|
| Sample Gas Flow | Typically 0.5 – 1.0 LPM |
| Max Inlet Pressure | ≤ 2 bar |
| Gas Connections | SS / PTFE (as per application) |
| Power Supply | 230 VAC, 50 Hz |
|---|---|
| Power Consumption | Approx. 500–800 W |
| Protection | Over-temperature protection |
| Mounting | 19” Rack-mount enclosure |
|---|---|
| Enclosure Material | Powder-coated metal |
| Cooling | Natural / forced air ventilation |
| Front Panel | Handles with digital controller |
Related products
Sampling Probes & CEMS Components
CEMS Gas Sampling System Service
Heated stainless-steel CEMS gas sampling probe and line that carries flue gas from the stack to the conditioning and analyzer system, configured to site requirements.
Sampling Probes & CEMS Components
Z-74i Ein – Heated CEMS Sampling Probe
Model Z-74i Ein
Z-74i Ein heated CEMS sampling probe with ceramic filter and internal/external purge, built for hot, dusty, humid and corrosive flue gas (sampling up to 600 °C).