Power Generation
Environmental monitoring requirements in power generation applications can include emission measurement, air quality monitoring and related monitoring systems.
Overview
Power plants burn large volumes of fuel and are among the most closely regulated emission sources. Continuous, accurate monitoring is essential for compliance and for efficient combustion and pollution control.
Monitoring needs
Typical requirements include SO₂, NOx, CO, CO₂, O₂ and dust at the stack, NH₃ slip after de-NOx systems, mercury, flue gas flow, temperature and moisture, ultra-low dust after wet desulphurisation, and ambient air quality around the plant.
How GPIPL helps
Complete CEMS, dust monitors for dry and wet stacks, NH₃ converters, mercury CEMS, greenhouse gas CEMS, flow monitors and zirconia humidity / oxygen analyzers – installed, calibrated and maintained by GPIPL.
Relevant solutions
-
Continuous Emission Monitoring Systems (CEMS)
Complete, compliance-ready CEMS for industrial stacks – gas analyzers, dust monitors, flow measurement, sampling and data acquisition, designed, manufactured, installed and supported by GPIPL.
-
Dust & Opacity Monitoring
Continuous dust and particulate monitoring for stacks and ducts – in-situ laser back-scatter, extractive forward-scatter for wet flue gas, and total particulate flow measurement.
-
Mercury & Heavy Metal Monitoring
Continuous monitoring of mercury and heavy metals in flue gas – dilution-type mercury CEMS using cold atomic fluorescence, and online heavy metal monitoring systems.
-
Ambient Air Quality Monitoring
Continuous ambient air quality monitoring stations and analyzers for SO₂, NOx, O₃, NH₃, particulates and VOCs – from single analyzers to complete CAAQMS and micro-monitoring networks.
-
AMC & Maintenance
Annual maintenance contracts, preventive maintenance and fast after-sales support that keep monitoring systems accurate, available and compliant.
-
Calibration & Testing
Calibration and testing of gas analyzers, dust monitors and environmental instruments under the supervision of qualified engineers using traceable national standards.
-
Environmental Data Acquisition (DAS)
Data acquisition systems that collect, store and transmit data from analyzers, dust monitors and flow monitors – the backbone of every CEMS and CAAQMS.
-
Industrial Gas Analysis
Online, portable and FTIR gas analyzers for flue gas, process gas and emission monitoring – TDLAS, DOAS, UV-DOAS, FTIR, chemiluminescence and UV fluorescence technologies.
-
Installation & Commissioning
Professional installation and commissioning of CEMS, analyzers and monitoring stations – from site survey and mounting to start-up, testing and data connectivity.
-
Process & Field Instrumentation
Temperature, humidity, pressure, flow, level and portable test instruments for process monitoring, utilities, clean rooms and maintenance teams.
-
Stack Emission Monitoring & Testing
On-site stack emission measurements with portable FTIR and flue gas analyzers – for compliance checks, performance tests, CEMS verification and pollution source investigation.
Relevant products
Cold-Dry Extractive CEMS
Online CEMS Cold Dry System
Model Z-51i Ein
Z-51i Ein positive-pressure explosion-proof cold-dry CEMS monitoring SO₂, NOx, O₂, dust, temperature, pressure and velocity, with optional HCl, HF, CO, CO₂ and humidity.
Hot-Wet CEMS
CEMS (Hot-wet) – Z-55i Ein
Model Z-55i Ein
Z-55i Ein hot-wet extractive CEMS measuring SO₂, NOx, CO, CO₂ and O₂ in real time, keeping the sample hot to prevent condensation and protect accuracy.
Dust & Particulate Monitoring
Dust Monitor (Extractive) Z-44i Ein
Model Z-44i Ein
Z-44i Ein extractive laser forward-scattering dust monitor with heat-traced sampling, built for ultra-low dust emission monitoring in low-temperature, high-humidity flue gas.
Sampling Probes & CEMS Components
NH3 Converter
Model Z-106P Ein
Z-106P Ein internally heated NH₃-to-NOx converter in a 19" rack enclosure, enabling accurate ammonia slip measurement with CEMS and gas analyzers.
Specialty CEMS (GHG, Mercury, HCl, Heavy Metals, Odour)
Mercury CEMS (Dilution) Monitoring System
Dilution-type mercury CEMS using cold atomic fluorescence (CAFS) to measure elemental, ionic and total mercury in flue gas, with supply, installation and commissioning.
Specialty CEMS (GHG, Mercury, HCl, Heavy Metals, Odour)
Greenhouse Gas Continuous Emission Monitoring System (CEMS)-Z-58i Ein-GPIPL
Model Z-58i Ein
Z-58i Ein TDLAS greenhouse gas CEMS measuring CO₂ with humidity, temperature, pressure and velocity, with multi-stage dust filtration and automatic probe blowback.
Temperature & Humidity Sensors
Humidity Module – Zr Z-18iEin
Model Zr Z-18iEin
Zr Z-18iEin zirconia humidity and oxygen analyzer for continuous measurement of H₂O and O₂ in high-temperature flue gas, IP65, with RS-485 Modbus.
Sampling Probes & CEMS Components
Z-74i Ein – Heated CEMS Sampling Probe
Model Z-74i Ein
Z-74i Ein heated CEMS sampling probe with ceramic filter and internal/external purge, built for hot, dusty, humid and corrosive flue gas (sampling up to 600 °C).