Dust Monitoring System (CEMS)
Ultra-low-range forward-scattering dust monitor for stacks, with heat-traced isokinetic sampling, air-curtain lens protection, automatic blowback and dual-range switching.
- Designed & manufactured in-house
- Tested & calibrated to traceable national standards
- Installation, AMC & after-sales support
Talk to our technical team: 08048057962
Overview
This Dust Monitoring System is an ultra-low-range dust monitor for particulate emissions in industrial stacks. It works on laser forward scattering – the light scattered by dust particles is measured to determine concentration.
Whole-line high-temperature heat tracing stops water vapour from affecting the reading, and isokinetic pitot-tube sampling keeps the sample representative. An air curtain keeps the optics clean, timed automatic blowback prevents blockage, and automatic dual-range switching covers both normal and ultra-low levels. The compact, lightweight unit is easy to install.
Key features
- Laser forward-scattering measurement
- Ultra-low range capability
- Whole-line high-temperature heat tracing
- Isokinetic pitot-tube sampling
- Air-curtain lens protection
- Timed automatic blowback
- Automatic dual-range switching; RS485 / Modbus
Applications
- Power boilers
- Industrial kilns and boilers
- Steel and petrochemical plants
- Cement and ceramics
- Waste incineration
- FGD and dust-removal control
Technical specifications
| Principle | forward scattering |
|---|---|
| Span drift | ±2%F.S. |
| Zero drift | ±2%F.S. |
| Detection limit | 0.05mg/m3 |
| Response time | ≤10s (selectable) |
| Indication error | ≤20% |
| Laser wavelength | 650nm, 20mW |
| Power supply | AC (220±22)V |
| Power supply frequency | (50±1)Hz |
| Power consumption | ≈ 1000W |
| Dimension | 330mm*380mm*350mm (customizable probe length) |
| Weight | ≈ 20kg |
| Digital interface | RS485 |
| Ambient temperature | -20℃~50℃ |
| Communication protocol | standard Modbus protocol (customizable) |
Related products
Dust & Particulate Monitoring
Continuous Dust Emission Monitoring System (Dust Monitor)
Model Z-17iEin
Z-17iEin laser back-scatter dust monitor for continuous particulate measurement in stacks and ducts (0–500 mg/m³, up to 10 g/m³ custom), IP65, 4–20 mA / RS485.
Dust & Particulate Monitoring
Dust Monitor (Extractive) Z-44i Ein
Model Z-44i Ein
Z-44i Ein extractive laser forward-scattering dust monitor with heat-traced sampling, built for ultra-low dust emission monitoring in low-temperature, high-humidity flue gas.
Dust & Particulate Monitoring
Light Scattering Digital Smoke Tester
Laser back-scattering smoke and dust tester for continuous online monitoring of dust concentration at gas pollution sources, installed from one side of the duct with no optical alignment.
Dust & Particulate Monitoring
Stack Total Particulate Flow (TPF) Monitoring System
Model Z-23Ein
Z-23Ein stack total particulate flow (TPF) monitoring system for continuous, real-time particulate emission monitoring, with 4–20 mA, RS-485 Modbus RTU and optional Ethernet.